You are here

Lookup Table (LUT) | Cypress Semiconductor

Lookup Table (LUT)

Last Updated: 
Jul 08, 2020

  • 1 to 5 Inputs
  • 1 to 8 Outputs
  • Configuration Tool
  • Optionally Registered Outputs
Symbol Diagram

LUT Uiagram

General Description

You can set up the Lookup Table (LUT) component to perform any logic function with up to five inputs and eight outputs. This is done by generating logic equations that are realized in the UDB PLDs. Optionally, the outputs can be registered. These registers are implemented in PLD macrocells. All macrocell flip-flops are initialized to a 0 value at power up and after any reset of the device.

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.