You are here

CYW43012 | Cypress Semiconductor

CYW43012

CYW43012 Features

Infineon’s AIROC™ CYW43012 an Ultra-Low Power single-chip, combo device features 1x1 Dual-Band 2.4GHz and 5GHZ Wi-Fi 4 (802.11n) and Bluetooth 5.0. With a low-power architecture, the CYW43012 is ideal for battery powered applications where best-in-class power consumption is critical. The CYW43012 provides 802.11ac friendliness by supporting 256-QAM (for 20MHz channels in the 5GHz band) enabling data rates up to 78Mbps with 802.11ac access points. On-chip power amplifier and low-noise amplifiers are included for both the 2.4 and 5GHz bands.

 

Wi-Fi Features

  • Wi-Fi 4 (802.11n and 802.11ac-friendly) Dual-band (2.4/5 GHz)

  • 1x1 SISO

  • MCS8 (256-QAM) for 20MHz channels, up to 78Mbps PHY data rate

  • Internal PA and LNA for both bands

Bluetooth Features

  • Class 1 (100 m) and Class 2 (10 m) operation

  • Supports BDR (1Mbps), EDR (2/3Mbps), BLE (1/2Mbps)

  • PCM for audio data

General Features

  • Best-in-class power consumption in active and power saving modes with MCU offload

  • SDIO v2.0 / v3.0 for WiFi with HCI over UART/SPI or embedded Bluetooth host stack in ROM

  • Integrated IPv4/ IPv6 network stack on-chip

  • Support for both RTOS and Linux/Android (A-Class) host designs

  • 40 GPIOs

Coexistence

  • 2-wire SECI for external BT/LTE

  • 3-wire GCI

Package

  • 106-ball WLBGA (3.76 x 4.43mm; 0.35mm pitch)

  • 300-ball FCBGA (9 x 9mm, 0.4mm pitch)

  • 251-pin WLCSP (3.76 x 4.43, 0.2mm pitch)

Operating Temperature

  • -20C to +70C

Applications

  • Wearables

  • Smart Home products using batteries

  • IoT Edge Nodes

 

CYW43012 Block Diagram

CYW43012 Block Diagram

 

Getting Started with the CYW43012


Evaluate the CYW43012

 

CYW943012MUEVAL Evaluation Kit

The Infineon CYW943012MUEVAL Evaluation kit enables you to evaluate and develop single-chip Wi-Fi applications using the CYW43012 device. This kit helps evaluate Wi-Fi and Bluetooth device functionality and develop applications quickly for faster time to market.

 

M.2 Modules Based on AIROC™ Wi-Fi & Combo Devices:

M.2 modules based on AIROC™ Wi-Fi & Combo devices are available for easy prototyping and development. Infineon’s PSoC™ 6 development system (CY8CEVAL-062S2) provides an M.2 connector enabling development with Infineon’s broad range of MCU devices. M.2 modules can be used with third party CPU development systems also with an M.2 adapter optionally available.

Learn More

M.2 Modules Based on AIROC Wi-Fi Combo Devices

 

Ultra-low-power PSoC62S2 Wi-Fi Bluetooth Pioneer Kit (CY8CKIT-062S2-43012):

The PSoC™ 62S2 Wi-Fi BT Pioneer Kit (CY8CKIT-062S2-43012) is a low-cost hardware platform that enables design and debug of the PSoC™ 62 MCU and the Murata 1LV Module (CYW43012 Wi-Fi + Bluetooth Combo Chip).

Price: $112.50

Learn More Add to Cart

Ultra-low-power PSoC62S2 Wi-Fi Bluetooth Pioneer Kit (CY8CKIT-062S2-43012)

 

PSoC™ 62S2 Evaluation Kit (CY8CEVAL-062S2):

Evaluating Infineon’s PSoC™ 6 MCU products and AIROC™ Wi-Fi & Combo products is easy using the PSoC™ 62S2 Evaluation Kit (CY8CEVAL-062S2). This flexible development system features an ultra-low-power, dual-core and high-performance PSoC62-2M device featuring 2MB of on-chip Flash, 1MB of SRAM, and a rich set of peripherals. An M.2 connector allows easy evaluation of AIROC™ Wi-Fi & Combo modules. The board also offers an Optiga secure element, CapSense input and an Arduino header for adding in sensors.

Coming Soon

PSoC 62S2 Evaluation Kit (CY8CEVAL-062S2)

 

 

ModusToolbox Software and Tools

ModusToolbox™ was built to make the developers life easy. It is a collection of easy-to-use software and tools enabling rapid development of Infineon MCUs, covering applications from embedded sense and control to wireless and cloud-connected systems using AIROC™ Wi-Fi, AIROC™ Bluetooth® and AIROC™ Wi-Fi and Combo devices.

Learn More

ModusToolbox Logo

 

Document Type Title English
Datasheet CYW43012 Single-Chip, Ultra-Low Power, IEEE 802.11n-compliant, IEEE 802.11ac-friendly™ MAC/Baseband/Radio with Integrated Bluetooth 5.0 for IoT

ModusToolbox Software and Tools

ModusToolbox™ was built to make the developers life easy. It is a collection of easy-to-use software and tools enabling rapid development of Infineon MCUs, covering applications from embedded sense and control to wireless and cloud-connected systems using AIROC™ Wi-Fi, AIROC™ Bluetooth® and AIROC™ Wi-Fi and Combo devices.

Learn More

ModusToolbox Icon

 

Linux® Support

Linux drivers are available for several AIROC™ Wi-Fi products. Visit the Cypress community to learn more about Linux support.

Learn More

Linux Support

 

Infineon Development Kits

CYW943012MUEVAL Evaluation Kit

The Infineon CYW943012MUEVAL Evaluation kit enables you to evaluate and develop single-chip Wi-Fi applications using the CYW43012 device. This kit helps evaluate Wi-Fi and Bluetooth device functionality and develop applications quickly for faster time to market.

Learn More

 

Cypress Developer Community Banner